Heat-resistant silicone, organized for real work.
Start with the S600 platform: one CoralAir-lined construction in three working lengths, then compare each silicone family by protection direction.
Explore the full rangeCoralAir™ liner · Liquid silicone · Smooth grip · 133 mil / 3.4 mm · Piping cuff
Waterproof · Optimal dexterity · Chemical and abrasion resistance · Superior grip in dry conditions
Food processing · Professional kitchen · Steam handling · Cold storage · Equipment manufacturing · EN 388 / EN 374 / EN 407 / EN 511 catalog listings
Two barriers. Five compared constructions.
- Liquid-silicone outer barrier
- CoralAir inner barrier
Two catalog pages. One closer look at SILTHERM™.
Browse the original catalog artwork for the thermal-insulation concept and five-model feature comparison.
MODEL S600S600 Heat-Resistant Liquid Silicone GlovesLiquid silicone 
MODEL S600-38S600-38 Extended-Cuff Heat-Resistant Liquid Silicone GlovesLiquid silicone 
MODEL S600-60S600-60 Long-Arm Heat-Resistant Liquid Silicone GlovesLiquid silicone 
MODEL S660S660 TPU-Coated CoralAir Heat-Resistant Liquid Silicone GlovesLiquid silicone 
MODEL S635S635 High-Temperature Liquid Silicone GlovesLiquid silicone 
MODEL S666S666 Heat-Resistant Liquid Silicone GlovesLiquid silicone 
MODEL S500S500 Heat-Resistant Liquid Silicone GlovesLiquid silicone 
MODEL S850S850 Sandy-Grip Heat-Resistant Liquid Silicone GlovesLiquid silicone 
MODEL S860S860 CoralAir Sandy-Grip Heat-Resistant Liquid Silicone GlovesLiquid silicone Soft at -70°C. Built for cold handling.
The S300 platform combines a flexible liquid-silicone outer layer with thermal liner choices for cold-chain, food, laboratory and outdoor work.
- Cold-protection constructions
- Moisture-wicking liner options
- Dry and wet grip
Liquid-silicone options for low-voltage electrical work.
SV05 and SV10 are unlined Class 00 and Class 0 constructions; SE05 adds a nylon liner and piping cuff. Current dielectric records and inspection procedures remain model-specific.
- Class 00 and Class 0
- 500 V and 1,000 V catalog listings
- Latex-allergy avoidance
Dry grip, dexterity and cut-resistant options.
S701 focuses on close-fitting dry grip and low metal impurities. The catalog groups S707G and S707R under one shared cut-resistant construction with separate EN 388 codes.
- Smooth silicone grip
- Low metal impurities
- S707 variants: cut level F
S990 for selected special-solvent tasks.
S990 is designed for selected solvents including DMF, NMP and lacquer thinner. Chemical selection still depends on concentration, temperature and exposure time.
- 47 mil / 1.2 mm
- 18-gauge nylon liner
- Type B · KLT catalog rating
Specialty heat models, placed together.
S660, S635 and S666 close the range with TPU-coated, high-temperature aramid and abrasion-oriented CoralAir constructions.
MODEL S660S660 TPU-Coated CoralAir Heat-Resistant Liquid Silicone GlovesLiquid silicone MODEL S635S635 High-Temperature Liquid Silicone GlovesLiquid silicone MODEL S666S666 Heat-Resistant Liquid Silicone GlovesLiquid silicone Confirm current model-specific test evidence, certification scope and application limits before purchasing.
Discuss your application.
Share your target use and request the current model-specific information.